If you like fish, it is important to know how to tie fishing knots correctly. If a knot properly, you may lose the fish is on the line. Learn three different methods of knots in order to catch the big.
instructions Arbor Knot
1 - The thread line around the spool shaft.
2 - Tie a knot around the line itself. Loop around the line and then again through.
3 - Tie a second knot in the tag end. This node must be behind the original node. Maintaining the line to slide through the first node.
4 - Ensure that both nodes are tense. Cutting the top row behind the label.
5 - Drag the first knot in the line to clamp around the coil axis.
Clinch Knot
6 - Pass the line through the eye of the hook.
7 - Double-turn or loop around the line five times.
8 - Pass the end of the line through the first loop. Then go through the big loop you created at the time of the end of the line in the first loop.
9 - Draw the node form gently. For this, after the line through the first loop. If successful, you have to start.
10 - Slide the coils down tight against the eye of the hook. The node ended up as a rope.
Trilene Knot
11 - Pass the line through the eye of the hook. Then turn through the eye again.
12 - Hold hook in your left hand and hold the line on foot with the right hand.
13 - The label loop standing line six times.
14 - Insert the tag end through the loop you created in step 1.
15 - Carefully tighten the knot by pulling the tag end and the command line. You can moisten the line to help tighten the knot. Cut the top of the label. It should be about 1/8-inch.
instructions Arbor Knot
1 - The thread line around the spool shaft.
2 - Tie a knot around the line itself. Loop around the line and then again through.
3 - Tie a second knot in the tag end. This node must be behind the original node. Maintaining the line to slide through the first node.
4 - Ensure that both nodes are tense. Cutting the top row behind the label.
5 - Drag the first knot in the line to clamp around the coil axis.
Clinch Knot
6 - Pass the line through the eye of the hook.
7 - Double-turn or loop around the line five times.
8 - Pass the end of the line through the first loop. Then go through the big loop you created at the time of the end of the line in the first loop.
9 - Draw the node form gently. For this, after the line through the first loop. If successful, you have to start.
10 - Slide the coils down tight against the eye of the hook. The node ended up as a rope.
Trilene Knot
11 - Pass the line through the eye of the hook. Then turn through the eye again.
12 - Hold hook in your left hand and hold the line on foot with the right hand.
13 - The label loop standing line six times.
14 - Insert the tag end through the loop you created in step 1.
15 - Carefully tighten the knot by pulling the tag end and the command line. You can moisten the line to help tighten the knot. Cut the top of the label. It should be about 1/8-inch.